RH 8 and RAID 0

[Jonathan Hutchins]

Quoting "Eric R." <rossiter at discoverynet.com>:

> The steps to creating RAID during installation
> 
>     1. Start the installer-choose graphical mode
>     2. Choose custom install
>     3. On the Disk Druid-Partition page add a /boot partition that is 
> not on a raid array. 20 MB should be plenty of room.

So you need at least 3 drives, right?

>     4. Add the partitions that will make up the raid device.
>            * Note: for raid 0 and raid 1 you must have at least 2 
> partitions. For raid 5 you will need a minimum of 3 partitions.

Will RH do software-based raid 5?

-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/